Hitachi RC-AGS1EA0E Bedienungsanleitung Seite 14

Power Safe (Max Current Switching )
•
This function limit the maximum current during the operation of Air conditioner so it will help to avoid
breaker trips if maximum current reaches to breaker limit. it limits the electrical current during
operation.
NOTE
●
Once Power Safe mode set ,it stored In the memory of remote controller and remain set even after
remote controller reset or battery replacement case.
●
Power Safe mode symbol will be visible in all mode if it set. It is one time setting procedure to use this
function.
●
This function will limits the maximum current drawn by air conditioner by reducing the speed of the
compressor, you may feel less cooling or heating performance compare to normal mode. If you feel so
please cancel Power Safe mode if Power Safe mode is set .
●
At heating operation or Cooling operation during Power Safe setting maximum capacity will decrease.
●
During Power Safe setting mode , it is recommeded to use Auto Fan speed.
When Power Safe set , Maximum current limit for model changes as below.
Model
1.8~3.5kW
4.2~5.0kW
How to set Power Safe mode (Power Safe)
● Place the indoor unit in the standby mode ( OFF mode on the
display of remote controller)
●
Press temperature down button
about 3 seconds together with directing remote control
toward indoor unit.
● symbol will be visible on LCD screen and indoor unit will
accept by buzzer sound.
How to cancel Power Safe mode
● Place the indoor unit in the standby mode ( OFF mode on the
display of remote controller)
●
Press temperature down button
about 3 seconds together.
symbol will be disappear on LCD screen and indoor unit will
●
accept by buzzer sound.
- 14 -
Maximum current with
Power Safe setting
6A
8A
and Up/Down swing button
and Up/Down swing button