Initialization Of The Built-In Aircloud Home Module - Hitachi RC-AGS1EA0E Bedienungsanleitung

Initialization of the Built-in airCloud Home Module

You can reset the internal settings (restore the factory settings) by remote controller.

How to restore factory setting
■
Please make this setting with the remote control in off mode.
Press button (Mode) and

together.
LCD will display "

then it will display normal screen.
Make sure "

for about 20 seconds.
Restart the unit & check "

that unit enters into pairing mode & restoring factory setting is
succeeded.
NOTE
• Please note that the configuration will be cleared and pairing procedure
will be required to do again to use the built-in airCloud Home module.
• Please refer separate operation manual available for more information
related Built-in airCloud Home Module.
"Wi-Fi" is a trademark or registered trademark of the "Wi-Fi Alliance".
- 21 -
button (On Timer) 3 seconds
" on Temperature segment for 3 seconds
" Lamp on the indoor unit flash 4 times repeatedly
" Lamp blinks 3 times. This ensures