Hitachi RC-AGS1EA0E Bedienungsanleitung Seite 16

SleepSense Operation
LOGIC ( SleepSense)
●
At First the Unit will operate at Cooling or Heating mode for 20 minutes at setting condition.
● With the motion sensor, the room air conditioner can monitor human movement. If no human movement is
detected, then the temperature will increase ( in case of cooling operation ) or decrease 1°C ( in case of
Heating) automatically and unit continues running for 1 hour.
The Fan speed will be changed to one tap lower than the set fan speed.
●
If the condition of activity in the room is stable then the unit will continue running with the temperature
increased by another 1°C( in case of cooling) or decrease 1°C ( in case of Heating) respectively.
●
During the SleepSense operation , if Big activity /movement is detected, the temperature and Fan speed
will resume back to previous setting.
●
During the SleepSense operation , if small activity /movement is detected, the temperature will decreased
( in case of cooling) / increased by 1°C ( in case of heating ) and Fan speed will increase by one tapping.
AQtiv-Ion
By pressing (AQtiv-Ion) button during Heat, Auto, Cool, Dry,
Fan operation, the AQtiv-Ion operation start.
To Start AQtiv-Ion operation
1
Press the AQtiv-Ion button
To Cancel AQtiv-Ion operation
Press the start/stop button.
2
Press the AQtiv-Ion button
will be disappear on LCD.
- 16 -
. is display on LCD screen.
again.