Hitachi RC-AGS1EA0E Bedienungsanleitung Seite 22

My Mode(Programming)
Use this mode for personalized comfortable settings. The My Mode can be set by using the remote controller.
●
Up to 3 programs can be set.
●
Programming of My Mode
●
●
●
●
●
Default Setting of My Mode
My Mode Mode
My Mode1 COOL
My Mode2 COOL
My Mode3 COOL
Enter to My Mode programming
Press the My Mode button continuously for 5 seconds .
●
" "blinks on the LCD. And " " , " " or " " any one appear at the right of
●
" ".
1
The blinking of " " will remain for 10 seconds.
By pressing the
●
selected for programming.
Mode Selection
Press (Mode) button in order to select desired Mode during "
●
2
blinks.
Mode will change from
●
(Fan) cyclically.
Fan Speed Selection
Press (Fan Speed) button in order to select desired Fan Speed
●
3
during " " blinks.
Available Fan speed only can be selected as per selected desired mode.
●
Desired Room Temperature Selection
Press button or
●
4
Temperature during "
Temperature range can be set between 16.0
●
Fan Mode can not be set desired Room Temperature.
●
Silent Mode Selection
Press (Silent) button in order to set or cancel Silent Mode during
●
5
" " blinks.
- 22 -
Temperature Fan Speed ON Timer /
OFF Timer
25. Auto No setting
25. Auto No setting
25. Auto No setting
(My Mode) button, " ", "
(Heat) (Auto)
button in order to select desired Room
" blinks.
and 32.0 .
Silent
No setting
No setting
No setting
" or " " can be
"
(Cool) (Dry)