Intended Use; General Safety Instructions; Required Components - Ossur CHEETAH XPLORE Bedienungsanleitung

ENGLISH
Medical Device
DESCRIPTION
The device is a prosthetic foot attached to the posterior wall of the
socket. It is composed of a cheetah inspired toe blade and a heel blade
secured using heel bolts.
The device consists of the following components (Fig. 1):
A. Foot Blade
B. Heel Blade
C. Heel Blade Bolts
D. Foam Heel Counter
E. Foam Sole
This device must be used with a Foot Cover and a Spectra Sock.

INTENDED USE

The device is intended as a part of a prosthetic system that replaces the
foot and ankle function of a missing lower limb.
Suitability of the device for the prosthesis and the patient must be
evaluated by a healthcare professional.
The device must be fitted and adjusted by a healthcare professional.
Indications For Use and Target Patient Population
• Lower limb amputation and/or congenital deficiency
• No known contraindications
The device is for moderate to extreme impact use, e.g., walking, running,
and sports.

GENERAL SAFETY INSTRUCTIONS

The healthcare professional should inform the patient about everything
in this document that is required for safe use of this device.
Warning: If there is a change or loss in device functionality, or if the
device shows signs of damage or wear hindering its normal functions,
the patient should stop using the device and contact a healthcare
professional.
The device is for single patient use.
Caution: Epoxy can cause allergic reactions when in direct contact with
body.

REQUIRED COMPONENTS

The following components are required to use the device:
• Lamination plate
• Attachment hardware
DEVICE SELECTION
Verify that selected variant of the device is suitable for the impact level
and weight limit according to the following table.
Warning: Do not exceed weight limit. Risk of device failure.
Incorrect category selection may also result in poor device function.
5