Troubleshooting - Dometic Track Large Montage- Und Bedienungsanleitung

Track Large
j
10

Troubleshooting

Fault
Blind stops in wrong position.
Different blinds running at differ-
ent speeds.
Powered blind does not work.
EN
Solution
➤ Refer to manual of your control device.
➤ Refer to manual of your control device.
➤ Prolonged or repeated use can activate the built-in
thermal cut-out. Leave the motor to cool for
30 minutes and try again.
➤ Check the power supply to the blind.
➤ Check if wiring for voltage to the motor is correct.
➤ If power supply is checked and the motor is still
faulty, contact Dometic.
Troubleshooting
31