Troubleshooting; Warranty - Dometic SKYSOL CLASSIC Montage- Und Bedienungsanleitung

Troubleshooting

10 Troubleshooting
Fault
Tension too low
Tensioned blind not running
smoothly
Powered blinds:
Blind stops in wrong position
Different blinds running at different
speeds
Powered blind does not work
11

Warranty

The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when
you send in the product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
• The number on the product label with details on the dimensions and material
specifications
Note that self-repair or nonprofessional repair can have safety consequences and
might void the warranty.
32
Skysol Classic & Honeycomb
Solution
➤ See chapter "Installation" on page 9.
➤ Check restraint positions and recess dimensions.
➤ Refer to manual of your control device.
➤ Refer to manual of your control device.
➤ Prolonged or repeated use can activate the built-
in thermal cut-out. Leave the motor to cool for
20 minutes and try again.
➤ Check the power supply to the blind.
➤ Check if wiring for voltage to the motor is correct.
➤ If power supply is checked and the motor is still
faulty, contact Dometic.
EN