Transport; Storage And Shipping; Use By Others - B+B Ejoy MD Bedienungsanleitung

Ejoy MD
| Electric wheelchair
Ejoy MD XL
| Electric wheelchair

11. Transport

To load the electric wheelchair you should ideally use ramps due to
the weight. If you still need to lift the wheelchair, grip it by firmly-fixed
frame parts or the hold points. Do not hold it by the casing, electronic
parts and other attachments. For transportation you can secure the
electric wheelchair using the two eyelets (Fig. 61/62). The wheelchair
61.
must not be used as a vehicle seat.
Under no circumstances may it be used as such. It does not fulfil the
requirements in compliance with ISO 7176-19. Failure to observe this
instruction can lead to extremely serious or fatal injuries in the event
of an accident.
You can see that your wheelchair is not approved for use as a seat in
a vehicle for transporting individuals with impaired mobility (KMP)
62.
from the symbols on the type plate of your product (Chapter 3.2):
Wheelchair is not designed for use as a seat in a vehicle for
transporting individuals with impaired mobility (Fig. 56)
Wheelchair is designed for use as a seat in a vehicle for trans-
porting individuals with impaired mobility (Fig. 57)
118
Electric wheelchair |
Electric wheelchair |

12. Storage and shipping

If the wheelchair is to be stored or shipped, all loose parts which are
not fixed, except for the drive wheels, must be removed and packed
individually in an appropriate cardboard box. The power circuit must
be open when stored for long periods of time. The individually packed
parts can then be packaged together in a larger cardboard box. We
recommend keeping the original packaging and storing it with this
purpose in mind, so that it is available if required. Your wheelchair
then has optimum protection against environmental influences during
storage or transport.
For storage of your commode chair, please observe the information in
the technical data and chapter 7.3.1.
To avoid mould growth and damage to the the upholstery parts, the
storage location should be as dry as possible and not be not exposed
to direct sunlight.

13. Use by others

The wheelchair is designed for re-usage by other persons. Before the
product is passed to another user, it must be serviced by a dealer and
hygienically cleaned. When passing the wheelchair onto another user,
please remember to hand over this user manual and the address of
your dealer to the new user.
The wheelchair must be checked in accordance with
the maintenance plan and be in proper technical
condition.
Bischoff & Bischoff GmbH - 2023-04-06 - Revision: 2
Ejoy MD
Ejoy MD XL
119