Specifications - HBM Machines H130529 Bedienungsanleitung

Gasoline is extremely flammable and is explosive under certain conditions. Drain the fuel
in a well-ventilated area with the engine stopped and cool. Never smoke or allow flames or
sparks in the area during this procedure.
Make sure that the fuel valve is in the on "ON" position. Remove the fuel cap and the drain
plug (1) from the carburetor bowl and drain the fuel into a suitable container. DO NOT save
the fuel for future use in the generator. Once the fuel has completely drained from the
system install the drain plug into the carburetor. Turn the fuel valve to the off "OFF" position.
Apply a small amount of oil to the threads on the fuel tank filler neck and install the cap.
Change the engine oil.
Remove the spark plug and pour a small amount of oil into the cylinder. Install the spark
plug but do not install the spark plug cap. Pull the starter handle 3 times to distribute the oil
over the cylinder walls.
Remove the battery and place the battery in storage. Periodically check the battery and
charge the battery when needed.
Move the generator to the storage place. Cover the generator.

SPECIFICATIONS

Model
Rated A.C. Output
Max. A.C. Output
AC Voltage(V)
AC Frequency(Hz)
Engine
Displacement(cc)
Oil Capacity(L)
Fuel Tank Capcity(L)
1
H130529
7500
8000
230/400
50
389
1.1
25
- 1 6 -