Herunterladen Inhalt Inhalt Diese Seite drucken

Practical Advice On Sawing; Original Accessories/Auxiliary Equipment; Information On Saw Blades; Before Use - Parkside PAAS 12 A2 Originalbetriebsanleitung

Akku-astsäge 12 v
Vorschau ausblenden Andere Handbücher für PAAS 12 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20

Practical advice on sawing

Check the material to be worked to make sure
that all foreign objects have been removed,
e.g. nails, screws, etc.
Switch the appliance off immediately if the saw
blade
jams. Open up the sawn gap using a
suitable tool and pull out the reciprocating saw.
Saw the material at a constant speed.
Original accessories/auxiliary
equipment
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.

Information on saw blades

You can use any saw blade that has a suitable
mount – ½" (12.7 mm) universal shaft. Saw
blades are available from retail stores in various
lengths and optimised for a variety of purposes.
NOTE
TPI = teeth per inch = the number of teeth per
2.54 cm
PAAS 12 A2

Before use

Charging the battery pack

CAUTION!
Always unplug the appliance before you
remove the battery pack
the battery pack to the high-speed battery
charger
.
NOTE
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
Connect the battery pack
battery charger
.
Insert the power plug into the socket. The
control LED
lights up red.
The green control LED
charging process is complete and the battery
pack is ready for use.
Push the battery pack
ance.
You should always switch the high-speed
charger
off for at least 15 minutes between
successive charging processes. Also disconnect
the power plug from the mains power socket.
from or connect
to the high-speed
indicates that the
back into the appli-
GB │ IE
 7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis