Radio Mode; Manual Station Search; Automatic Station Search - Medion LIFE E66566 Bedienungsanleitung

Your equaliser setting is automatically applied to all operating modes. The radio
closes the equaliser menu after a few seconds and returns to the previous display.

9.6. Radio mode

 Fully unwind the connected wire antenna for radio reception.
 Switch the device on.
When you switch the radio on, it starts in the last operating mode used.
If necessary, press the FUNC/USER button or the FUNC button on the
remote control several times to switch to radio mode.
 To switch from stereo to mono playback during radio operation, press the
STOP/MO/ST button.

9.6.1. Manual station search

 Press and hold the
 Press and hold the
 To save the set radio frequency, press the SET/MEM./AMS button once or the
PROG MEM button on the remote control.
The currently set frequency and the currently selected memory slot number "A_ _"
are shown alternately on the display.
 Now press the
memory slot number is displayed.
 To save the set radio frequency, press the SET/MEM./AMS button once or the
PROG MEM button on the remote control.
The radio has two different memory groups (users), A and B.
 To change the memory group, press and hold the FUNC/USER button or the
FUNC button on the remote control.
The selected memory group (A or B) is shown on the display.
 Proceed as previously described to store a station under the respective memory
group "MEM - A01 - A032" or "MEM - B01 - B032".

9.6.2. Automatic station search

The device is switched on and is in radio mode.
 Press and hold the SET/MEM./AMS button or the AMS button on the remote
control to start the automatic station search.
The radio will automatically search for stations that can be received (max. 32
stations) and store them under memory group A. Memory slots already allocated
manually are overwritten.
button to change the frequency upwards.
button to change the frequency downwards.
or button several times until the desired
DE
EN
FR
NL
IT
ES
61