Troubleshooting - Klarstein TOMAHAWK Bedienungsanleitung

TROUBLESHOOTING

Problem
Gas leak from
damaged hose.
Gas leak from
the gas bottle
Gas leak from gas
cylinder valve
Gas leak between
gas cylinder and gas
pressure regulator.
Fire is coming out
of the openings of
the regulators.
Grease fire or recur-
ring large flames on
the cooking surface.
Possible reason
The hose is damaged.
Mechanical failure due
to long term storage or
mishandling.
Errors due to mishandling
or mechanical failure.
Incorrect installation, the
connection is not tight, the
sealing ring is broken.
Burner tube fire due to
partial blockage.
Accumulation of grease in
the burner area.
Solution
Turn off the gas valve on the
gas cylinder and replace the
hose. Perform a gas leak test
before changing the hose.
Turn off the gas bottle valve.
Take the gas cylinder back to
your gas dealer.
Turn off the gas bottle valve.
Turn off the gas cylinder valve,
remove the gas pressure
regulator and check the
sealing ring for damage.
Perform a gas leak test on all
components.
Turn the control knobs and
gas cylinder valve to the off
position. After the fire is out
and the grill has cooled,
remove the burner and check
the burner ports for spider
nests or rust.
Turn off the gas bottle valve.
Leave the cover open and let
the flames go out. Allow the
device to cool down and then
remove any leftover food and
grease build-up around the
burner, drip tray and surfaces.
EN
37