Klarstein TOMAHAWK Bedienungsanleitung Seite 32

EN
32
Changing the Gas Bottle
Note: Turn off the gas bottle's gas valve (a wrench is not required).
If you place the gas cylinder outside the grill, the gas cylinder must not be more than
80 cm high, 35 cm wide and 1 1 kg in weight.
48 cm
23.5 cm
Connecting a Gas Bottle
1. Rotate the orange protective cap so the arrow points to the gap in the cover.
2. Remove the orange protective cap by first pulling out the pin and then removing
the cap. Do not use tools and leave the protective cap hanging down on the gas
cylinder.
3. Make sure the black O-ring is inside the gas cylinder valve. Connect the gas
pressure regulator to the valve.
4. Turn the gas cylinder attachment clockwise and then switch on the gas grill
according to the operating instructions.
Disconnecting the Gas Cylinder
5. Turn off the gas tap if the gas bottle has one; unless there is a double cylinder
installation with a switching valve. Wait for the burner and pilot light to go out. In
the case of double cylinder installations, only the empty gas cylinder needs to be
closed.
6. Place the orange protective cap on the empty gas bottle.
WARNING
Risk of burns
The black handle (pictured above) becomes very hot when using the
gas grill. Never touch this area without protective gloves!
48 cm
23.5 cm