Flip Function; Restore Default - switel BCF 867 Bedienungsanleitung

3

Flip Function

.12
In this submenu you can flip the video horizontally when mounting the camera
on the ceiling. See Fig. 25.

Restore Default

3
.13
In this submenu you can reset the system to default.
See Fig. 26.
4
Status Information
Status Bar
4
.1
The status bar will be displayed on the top of the screen. See Fig. 27.
1.
Camera number indicator
2. Signal strength indicator
3.
Temperature indicator (Camera side)
4.
Battery status / Charging indicator
4 Warning Alarm
.2
The warning sound will be emitted from the monitor unit in the following cases.
Status
Out of range
Lost connection
Temperature alarm
VOX alarm
Low battery
Note : You can press any key of monitor stop the alarm.
Indication
Continuous beeps
for one minute
2 consecutive beeps and
temperature indicator
on the screen blinking
3 consecutive beeps
2 consecutive beeps and
on the screen
blinking
Press to make sure.
Action
Move the monitor closer
to the camera. Check the
power of camera.
Check the temperature of
camera side.
Disable temperature alert
(See Setup 3.4)
Disable VOX function
(See Setup 3.5)
Connect the monitor unit
to the AC adapter.
(See Setup 2.1)
7