Connecting To A Device Via Bluetooth; (Pairing); Connection Displays - Beyerdynamic SPACE Bedienungsanleitung

12/20

Connecting to a device via Bluetooth

Before you can use the product, you must pair it with your mobile phone or another
Bluetooth -enabled device. The pairing procedure may diff er depending on the device.
®
► Please refer to the relevant operating inst ructions of the device you wish to pair the product with.
E ablishing a connection:
 The product is switched on.
1. Press and hold the
The Bluetooth connection mode will sta .
®
The LED display flashes alternately blue and red.
2. Activate the Bluetooth
necessary.
3. In the Bluetooth
devices and connect both
A er a successful connection, the LED is a steady blue. Each time the unit is switched on
again, the units will connect as soon as they are within range of each other.
Deleting the li of already connected devices:
► Press the
button for longer than 10 s.
The list of already connected Bluetooth® devices (maximum 8) is deleted and a
connection to the active Bluetooth® device is established.
A double signal tone confirms success.

Connection displays

LED display of the connection
Bluetooth :
®
Pairing/recognition possible
Bluetooth :
®
Connected
Bluetooth :
®
Connectable / connection lost
Connected to USB
button for 1 to 3 s.
function on the playback device and search for new devices if
®
menu of the playback device, select "SPACE" from the available
®
devices.
atus:

(pairing)

®
Flashes blue
and red
alternately
Steady blue
Flashes blue
Entire LED ring
is white