Alarm Indicator And Sounds - ECOVACS ROBOTICS DEEBOT OZMO 610 Benutzerhandbuch

3. Operating and Programming

3.7 Alarm Indicator and Sounds

If DEEBOT detects a problem and needs your assistance, it emits alarm beeps or the Status
Indicator Light illuminates.
Alarm Sound
/
One Beep
Two Beeps
Three Beeps
Four Beeps
Five Beeps
Six Beeps
Seven Beeps
Eight Beeps
20
EN
Indicator Light
Status Indicator
Light flashes twice
DEEBOT has low
and goes out
battery.
once DEEBOT is
powered ON.
Status Indicator Driving Wheel
Light flashes RED. Malfunction
Status Indicator
Main Brush Malfunction
Light flashes RED.
Driving Wheel
Malfunction
Status Indicator
Light flashes RED.
DEEBOT gets into
trouble while working
and stops.
Status Indicator
Dust Bin Malfunction
Light flashes RED.
Status Indicator
Low Battery
Light flashes RED.
Status Indicator
Side Brush Malfunction
Light flashes RED.
Status Indicator Anti-Drop Sensor
Light flashes RED. Malfunction
Status Indicator DEEBOT is powered
Light flashes RED. OFF while charging.
Problems
Power ON the robot. Manually
place the robot on the Docking
Station and charge.
Check Driving Wheels for
tangled hair or debris and clean.
Check Main Brush for tangled
hair or debris and clean.
Turn over the robot. Press
Driving Wheels to check for a
clicking sound. If they do not
click, please contact Customer
Service.
Manually remove the obstacles
and restart DEEBOT.
Remove the Dust Bin and re-
install it properly. If the robot still
emits the alarm, please contact
Customer Service.
Manually place the robot on the
Docking Station to charge.
Check Side Brush for tangled
hair or debris and clean.
Check Anti-Drop Sensors for
dust and clean.
Power ON the robot.
Solution