Description; Purpose; Overview; General Safety Warnings - Cramer 2502486 Bedienungsanleitung

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used for domestic lawn mowing. The cutting
blade must be approximately parallel to the ground. All four
wheels must touch the ground while you mow.
1.2

OVERVIEW

Figure 1-11
Handle switch
1
Start button
2
Upper handle
3
Quick adjust lever
4
Rear discharge flap
5
Height adjustment lever
6
Battery compartment flap
7
Grass catcher
8
Mulch plug
9
Side discharge chute
10
Self-propelled speed control
11
Self-propelled drive lever
12
Door rod
13
Grass catcher hook
14
Side discharge flap
15
Height adjustment button
16
Battery release button
17
Safety key
18
Blade bolt
19
Blade
20
2 GENERAL SAFETY
WARNINGS
Read all safety warnings, instructions, illustrations and
specifications provided with this machine. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
3

INSTALLATION

Do not use accessories that are not recommended by the
manufacturer.
English (Original Instructions)
WARNING
WARNING
WARNING
Do not put in the safety key or the battery pack until you
finalised the assembly of all the parts.
3.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
3.2 UNFOLD AND ADJUST THE
HANDLE
Figure 2
1. Press and hold the quick-adjust lever to release the handle
from the locked storage position.
2. Move the upper handles to the operating position. You
may raise or lower the handle to a position comfortable
for you. There are 3 positions for you to choose.
3. Release the quick-adjust levers to lock the upper handle
into position.
Make sure that the two handles are in the same position.
WARNING
Do not make damage to the cables when you fold or unfold
the handle.
3.3

INSTALL THE GRASS CATCHER

Figure 3
1. Remove the mulch plug.
4
NOTE