General Notes - Baumer HUBNER BERLIN SAFETI POG 10 Montage- Und Betriebsanleitung

1

General notes

1.1 Symbol guide:
Danger
Warnings of possible danger

General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2 The combination POG 10 + FSL is an opto electro nic precision measurement device which
must be handled with care by skilled personnel only.
1.3 The expected operating life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4 The storage temperature range of the device is between -15 °C and +70 °C.
1.5 The operating temperature range of the device is between -40 °C (optionally with
heating: -50 °C) and +100 °C.
1.6 EU Declaration of Conformity meeting to the European Directives.
1.7 We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.8 Maintenance work is not necessary. Repair work must be carried out by the manufacturer.
Earthing brushes must be changed by the manufacturer (if required). Alterations of the device are
not permitted.
1.9 In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.10 Combination components are to be disposed of according to the regulations prevailing in the
respective country.
i
Warning!
Damaging the seal
MB069a.1T1 - 11068664
on the device invalidates warranty.
Baumer_POG10-FSL-B3-T1_II_DE-EN (16A2)
1
General notes
 2