Storing The Pressure Cooker - GSW BioStar Gebrauchsanweisung

BioStar DE-GB-FR Seite 26 Montag, 13. November 2017 10:31 10
3. Take the pressure regulator
apart.
4. Rinse the separate parts of the
pressure regulator under clean,
hot water.
5. Put the individual parts of the
pressure regulator back together
in reverse order.
6. Clean the lid (see following
paragraph).
7. Place the pressure regulator back into the lid.
It should be put back into the setting Ø and
pushed all the way down in order to turn it so
that the appliance can function again.
Lid (4):
Caution! The lid should not be washed in the
dishwasher.
1. Wash the lid with hot water and washing-up
liquid.
If the lid is particularly dirty, soak it for a little
while in washing-up water.
2. Rinse the lid under clean, hot water.
3. Dry the lid with a tea towel to avoid any
water marks.
4. Replace the pressure regulator.
26
Sealing ring (7):
Please note: The sealing ring should be
replaced once a year if you use the pressure
cooker regularly. Replacements are available in
specialist shops.
1. Remove the sealing ring from the lid.
2. Rinse the sealing ring in
clean, hot water.
3. Dry the sealing ring with a tea towel.
Please note: The sealing ring should not be
squashed or deformed during storage. It is
therefore advisable to place the sealing ring
back into the lid during storage.

7.3 Storing the pressure cooker

Caution! The pressure cooker should never be
stored with the lid on. If there is no ventilation
then condensation may develop which could
lead to a build up of bad smells and may even
damage the pressure cooker.
1. The stand and steam insert can be stored in
the base (if applicable).
2. Store the sealing ring in the lid.
3. Store the base and the lid separately.
Please note: Condensation may develop
in the pressure cooker if it is stored with the
lid on. te sich Schwitzwasser bilden.