Maintenance; Disposal; Trouble Shooting - Merax MS291679AAA Benutzerhandbuch

12.

Maintenance

All maintenance measures should be carried out regularly. The regular implementation of preventive
maintenance measures contributes to safe and trouble-free use.
Warning: Never use aggressive cleaning agents for cleaning!
Designation
Seat / Rail
Main frame
Water tank and water
treatment
Pull rope
13.

Disposal

If you want to dispose of the item, please contact your local dealer or a local recycling company.
Never take the device to a municipal collection point!
Never dispose of the device with normal household waste! In doing so, you make an important
contribution to preserving the environment.
14.

Trouble Shooting

Problem
The color of the
water changes or
becomes cloudy.
After inserting the
battery, the display
does not turn on.
The display is on but
does not show any
data.
Display shows
incorrect values.
Interval
Weekly
Weekly
3 - 6 Month
Every 100 hours of
training
Possible reason
The rowing machine is in
direct sunlight or the water
has not been treated.
The local tap water is of
poor quality.
The battery is installed
incorrectly or needs to be
replaced.
The connection is loose or
broken.
Sensor distance is too
wide, faulty sensor.
Solution
Wipe the seat / rail with a dry cloth.
Wipe the frame with a dry cloth.
Refer to the "Drain/Change Water" section
in this manual.
Check the pull rope for wear and if
necessary, contact customer service for a
replacement.
Solution
Change the position of the rowing machine to
reduce direct sunlight.
Add water purification tablets (not included) or
change the water in the device.
Consider using distilled water.
Insert or replace the battery correctly. If the
LCD display still does not work, try rotating the
battery a little. If this does not help, contact
customer service.
Check whether the connector of the display is
connected correctly.
Check the sensor distance. This should be
1mm.
31