Safety Instructions; Electrical Connection - Progress PHN23103X Benutzerinformation

Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
•
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.

2. SAFETY INSTRUCTIONS

2.1 Installation
WARNING!
Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions supplied
with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
place that meets installation requirements.
• The kitchen cabinet and the recess must
have suitable dimensions.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the oven door opens without restraint. If
not the oven has to be lifted.
• Parts of the appliance carry current. Close
the appliance with furniture to prevent
touching the dangerous parts.
• The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
Cabinet minimum height
(Cabinet under the work‐
top minimum height)
Cabinet width
Cabinet depth
Height of the front of the
appliance
Height of the back of the
appliance
4 ENGLISH
Before you install the appliance, fit it with the
applicable hob from the table.
590 (600) mm

2.2 Electrical connection

560 mm
Risk of fire and electric shock.
550 (550) mm
• All electrical connections should be made
598 mm
• The appliance must be earthed.
579 mm • Make sure that the parameters on the
Width of the front of the
appliance
Width of the back of the
appliance
Depth of the appliance
Built in depth of the ap‐
pliance
Depth with open door
Ventilation opening mini‐
mum size. Opening
placed on the bottom
rear side
Mains supply cable
length. Cable is placed
in the right corner of the
back side
Mounting screws
Type
PES6001E
PES6061E
WARNING!
by a qualified electrician.
rating plate are compatible with the
594 mm
558 mm
561 mm
540 mm
1007 mm
560x20 mm
1100 mm
4x25 mm
Maximum power
6000 W
7600 W