Safety Instructions; Electrical Connection - Progress PHN1320X Benutzerinformation

Internally the appliance becomes hot when in operation. Do
•
not touch the heating elements that are in the appliance.
Always use oven gloves to remove or put in accessories or
ovenware.
Before maintenance cut the power supply.
•
Ensure that the appliance is switched off before replacing
•
the lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
•
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
If the supply cord is damaged, it must be replaced by the
•
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
To remove the shelf supports first pull the front of the shelf
•
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the
•
fixed wiring in accordance with the wiring rules.

SAFETY INSTRUCTIONS

Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• The kitchen cabinet and the recess must
have suitable dimensions.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
All manuals and user guides at all-guides.com
• Parts of the appliance carry current.
• The sides of the appliance must stay

Electrical connection

• All electrical connections should be
• The appliance must be earthed.
• Make sure that the electrical information
• Always use a correctly installed
• Do not use multi-plug adapters and
Close the appliance with furniture to
prevent touching the dangerous parts.
adjacent to appliances or to units with
the same height.
WARNING! Risk of fire and
electrical shock.
made by a qualified electrician.
on the rating plate agrees with the
power supply. If not, contact an
electrician.
shockproof socket.
extension cables.
Progress 3