Technical Specifications - Cristec YPOWER+ 12V/16A Bedienungsanleitung

5 T
ECHNICAL SPECIFICATIONS
12V-16A, 12V-25A, 24V12A
Part Number
Model
Recommended battery bank*
Input
Voltage
Frequency
Input current consumption 230/115VAC
Recommended power for a generator
Power factor
Efficiency
Input fuses
Output
Number of battery banks
Nominal current (+/-7%) / Rated Power
Charging curve
Battery type
Boost voltage
Floating voltage
Peak to peak ripple and noise
Automotive output fuse mounted in series
in minus pole -BAT
Environment
Cooling
Sound level
Operating temperature at 230VAC
Storage temperature
Relative humidity
Casing
Material
Dimensions (length, height, depth)
Weight
Fixing center distance
Fixing screw (wall)
Protection factor
Electronic card protection
Standards
CE declaration of conformity
CE / EMC MARK
CE / Security MARK
Protections
Communication
Options
*Recommended battery capacity for lead type batteries, ratio C/10. Consult us for lithium batteries capacity
YPO12-16STPL/(OEPL)
12V/16A
100-200Ah
1.1/2.2A
280W
T6.3A/250V - SCHURTER Ref. 0001.1032 (F101)
3 separate positive terminals : +BAT E, +BAT 1 and +BAT 2 (integrated Mosfet splitter )
Each bank can be used individually and delivers the rated current
16A/228W
IU or IUoU through internal push-button, Bluetooth or CAN-Bus
Lead sealed as factory setting - Gel, AGM, calcium lead, LiFePO4, DC power-supply mode, etc.
14.4VDC for lead sealed battery (factory setting)
13.8VDC for lead sealed battery (factory setting)
1 x 20A/32V (F400)
Casing comprises 3 parts: Aluminium sink frame / Thermoplastic body / Aluminium clasp
Water-repellent varnish (marine environment)
- Against transient input overvoltage by varistor (out of warranty)
- Against output polarity inversions by fuse
- Against short-circuits and output overloads
- Against abnormal overheating
CANBUS (according to models) / Bluetooth as standard (optional on OE version)
Temperature probe / Bluetooth dongle (OE versions)
YPO12-25STPL/(OEPL)
12V/25A
200-300Ah
from 90 to 265VAC single-phase automatic
from 47 to 65Hz automatic
1.7/3.4A
435W
1
Greater than 90%
1 -BAT negative terminal
25A/356W
(Boost, Absorption, Floating and Refresh)
Specific request on demand
< 2% (at rated conditions)
1 x 30A/32V (F400)
Fanless
0
From -20°C to +60°C, derating above 60°C.
From -20°C to +70°C
up to 70% (95% without condensation)
236 x 180 x 96 mm
2kg
272 x 170 mm
4 x M5 round head screws
IP22
Available on request
EN61204-3
EN60335-2-29, ISO8846
YPO24-12STPL/(OEPL)
24V/12A
100-200Ah
1.7/3.4A
420W
12A/342W
28.8VDC for lead sealed battery
(factory setting)
27.6VDC for lead sealed battery
(factory setting)
1 x 15A/32V (F400)
52