Cormach SUPER VIGOR 60 Handbuch Für Gebrauch Und Wartung Seite 80

ATTENTION
If the by-pass coil or the stand-by func-
tion have problems, the wheel can still
be released from the turntable. Set the
1, to pos. 0 (Stand-By off function). At
this point, the control unit motor will
always be running. Use a screwdriver
on the by-pass coil and then on the
to make the machine operate at emer-
gency speed. In this way, the locked
wheel can be released. Then contact
technical assistance.
WARNING
authorise users to carry out work on the
machine with the exception of those
operations expressly described in the
user manual. It only enables users to
provide the technical assistance service
with precise information in order to
minimise delays.
WARNING
The manufacturer declines all responsibility for claims resulting from the use of
non-original spare parts or accessories.
WARNING
Unplug the machine from the socket and make sure that all moving parts have been
locked before making any adjustments or maintenance work.
WARNING
Do not remove or modify any part of this machine (except for assistance).
WARNING
pressurised oil escapes, it can cause serious injury.
- E
NGLISH
MAINTENANCE