Bluetooth Connection; Controlling The Music Volume; Selecting A Song; Maintenance And Cleaning - LIVARNOLUX IAN 113911 Montageanleitung Und Bedienungsanleitung

Initial use / Maintenance and Cleaning / Disposal
2. Deactivating the timer
To deactivate the timer function during the 30
minute period, press the "
holding more than 3 seconds. A long beep will
sound when the LED ceiling light
the signal, confirming deactivation of the timer
function.

Bluetooth connection

1. Bluetooth connection
Press the audio "
confirms reception of the signal.
Approx. 1–2 seconds later the Bluetooth con-
nection will be accompanied by music and es-
tablished automatically, the blue LED inside the
LED ceiling light
5
A brief melody will sound once connected.
When connecting with your mobile, tablet, etc.
for the first time, select Bluetooth connection
"LBT00738".
2. Disconnecting Bluetooth
Press the audio "
confirms reception of the signal. Bluetooth has
been disconnected.
Once connected you may use the
following audio controls:

Controlling the music volume

1. Lowering the music volume
Press the " " button Volume –
ume. A beep will sound when reaching the minimum
volume. Pressing it briefly will gradually decrease
the volume as pressed. Holding the "
Volume – will automatically lower the volume
20
to the minimum.
2. Increasing the music volume
Press the " " button Volume +
volume. A beep will sound when reaching the max-
imum volume. Pressing it briefly will gradually increase
the volume as pressed. Holding the "
10 GB/IE
" button again,
17
receives
5
" button (audio) . A beep
18
begins to flash rapidly.
" button (audio) . A beep
19
to lower the vol-
20
" button
to increase the
21
" button
Volume + will automatically increase the volume
21
to the maximum.

Selecting a song

1. Previous song
Press the " " button Select song (previous)
select a previous song or to replay the song from
the beginning.
2. Next song
Press the " " button Select song (next)
the next song.
3. Pause
Press the " " button Pause / Bluetooth Connection
Standby briefly to pause. Holding the "
24
ton Pause / Bluetooth Connection Standby
set the Bluetooth connection to standby for approx.
10 min. The Bluetooth connection will then be closed.

Maintenance and Cleaning

CAUTION! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
Do not use solvents, petrol, etc. They could
damage the light.
Allow the light to cool down completely.
CAUTION! RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Only use a dry, lint-free cloth for cleaning.
Then replace the fuse or switch on the circuit
breaker in the fuse box (I position).

Disposal

The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at
your local recycling facility.
to
22
to select
23
" but-
will
24