Find The Handset; Make An Internal Call; Intercom - Geemarc AMPLIDECT 595 Photo Bedienungsanleitung

4.8 Find the Handset

This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
•
In idle mode, press
All the handsets registered to the base will produce the paging tone, and "PAGING" will
flash on the screen. You can stop the paging by pressing
RIGHT SOFTKEY
paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.9

Make an Internal Call

This feature allows you to make internal calls, transfer external calls and make
conference calls. If the called handset is not answered within 60 seconds, it will stop
ringing and the calling one will return to standby mode.
4.9.1

Intercom

Using a handset:
1. In idle mode, press RIGHT SOFTKEY
handsets or base will display except the calling handset.
2. Select the desired handset number or base you want to intercom with.
3. The called handset or base rings. Press
internal call or
Using the Handset
If you receive a call on the base in speaker mode, the call is automatically transferred
on the handset if the handset is removed from the base.
/HANDSET LOCATOR.
on any handset or
on the base.
/
/HANDSET LOCATOR on the base to stop
and the numbers of the registered
on the called handset to establish the
17
/