Connect The Corded Base Station - Geemarc AMPLIDECT 595 Photo Bedienungsanleitung

2.3

Connect the Corded Base Station

Plug the large end
of the larger power
adapter into an
electrical outlet not
controlled by a wall
switch
Route the cords
through the slots.
Plug the small end
of the larger power
adapter into the
power jack on the
back of the
telephone base.
NOTE
Use only the power adapter supplied with the base station.
Classified TNV-3 according to EN62368-1 standard.
Classified "hazardous voltage" according to EN62368-1 standard
Plug one end of the
telephone line cord
into a telephone jack
or a DSL filter.
A DSL filter (not included)
is required if you have
DSL high-speed Internet
service. The DSL filter
must be plugged into the
telephone wall jack.
Telephone line cord
3
Plug the other
end of the
telephone line
cord into the
TEL. LINE jack
on the back of
the telephone
base