Call All Handsets; Transfer An External Call; Make A 3-Way Conference Call - Geemarc AMPLIDECT 595 Photo Bedienungsanleitung

4.9.2

Call All Handsets

Using a handset:
1. In idle mode, press RIGHT SOFTKEY
handsets will display except the calling handset.
2. Select ALL to ring to all registered handsets.
4.9.3

Transfer an External Call

Using a handset: During
an external call:
1. Press LEFT SOFTKEY
2. Press LEFT SOFTKEY
with.
3. Press LEFT SOFTKEY
called handset rings.
4. Press on the called handset to establish an internal call.
5. Press on the calling handset or put the calling handset on the charging cradle to
end the current call with the external party.
6. The external call is transferred to the called handset.
4.9.4

Make a 3-way Conference Call

The conference call feature allows one external call to be shared with the base and
cordless handset or two cordless handsets. The three parties can share the
conversation and no network subscription is required.
Using a handset: During
the external call:
1. Follow Steps 1 to 4 in section 4.9.3.
2. Press and hold
NOTE:
Any party (corded base or cordless handset) hangs up during a conference call will leave
the other party still in connection with the external call
and /
to select the desired handset you want to intercom
and the external call is put on hold automatically and the
on the calling handset to establish the conference call.
and the numbers of the registered
to select INTERCOM.
18