Delete A Personalized Ogm (Set Ogm To Default); Set The Answer Delay; Set The Recording Time Of Incoming Message - Geemarc AMPLIDECT 595 Photo Bedienungsanleitung

13.5.3

Delete a Personalized OGM (SET OGM to DEFAULT)

Using a handset:
1. Repeat Steps 1 to 3 in the section 13.5.2.
2. Press LEFT SOFTKEY
3. Press LEFT SOFTKEY
NOTE:
Your personalized OGM and return to previous menu and the pre-set OGM is
restored automatically.

13.5.4 Set the Answer Delay

You can set the number of rings before the answering machine answers and starts
playing your OGM. You can set the answering machine to answer after two to ten rings
or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new message
has been registered then the answering machine switches to answering after
approximately 2 signals. This is useful when using remote access; if you call up the
answering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using a handset:
1. Press LEFT SOFTKEY
2. Press LEFT SOFTKEY
3. Press LEFT SOFTKEY
4. Press LEFT SOFTKEY
(Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS, 10 rings or TOLL SAVE).
5. Press LEFT SOFTKEY

13.5.5 Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages.
Using a handset:
1. Press LEFT SOFTKEY
2. Press LEFT SOFTKEY
3. Press LEFT SOFTKEY
4. Press LEFT SOFTKEY
(Available options: 60S, 120S, 180S, or UNLIMITED).
5. Press LEFT SOFTKEY
and / to select DELETE.
and RESET TO DEFAULT is displayed.
and / to select ANS. SYS.
and / to select SET TAM.
and / to select ANS. DELAY
and / to select your desired answer delay.
to confirm.
and / to select ANS. SYS.
and / to select SET TAM.
and / to select RECORD TIME.
and / to select your desired recording time
to confirm.
40