Handset Lcd Display Icons And Symbols - Geemarc AMPLIDECT 595 Photo Bedienungsanleitung

3.3

Handset LCD Display Icons and Symbols

The screen display gives you information on the current status of the telephone.
Indicates the current signal strength. More bars indicate
more signal strength. If the handset is too far from the
base, this icon will disappear on the LCD
Steadily on when a call is in progress or an intercom is in progress.
Flashes when there is an incoming call.
Steadily on when the speakerphone is turned on.
Steadily on when the battery is fully charged.
Animates when battery is charging.
Beep and Flashes when low battery is detected to indicate that it needs
charging.
Steadily on when the telephone answering machine (TAM) is turned on.
Flashes when a new message is received in the answering machine.
Steadily on when an alarm is set.
Flashes when the alarm time set before reaches.
Steadily on when there are received new Voice Message
Waiting (VMWI) not yet read.
Disappears when all the voice messages have been read.
Steadily on
Display in the call list for the blocked call entry.
Steadily on when the ringer is switched off.
Steadily on when there is(are) new call(s) in call list.
Steadily on when there is(are) new call(s) in call list.
Steadily on when the boost function is activated
when any block mode/ w/o num is enabled.
10