What If There Are Problems; Possible Cause; Technical Specifications - Beurer TL 90 Gebrauchsanweisung

11. What if there are problems?

Problem

Possible cause

Device does not On/off button switched off
light up
No electricity
No electricity
Fluorescent tube has reached the end of its
service life. Fluorescent tube is defective.

12. Technical specifications

Dimensions (WHD)
Weight
Lighting elements
Power
Light intensity
Radiation
Mains connection
Operating conditions
Storage conditions
Product classification
Degree of efficiency of the ballast
Source effiency (lm/W) of the bulb
Color temperature of tubes
Subject to technical modifications.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EEC Medical Devices as
well as the Medical Devices Act.
This device complies with European Standard EN60601-1-2 and is subject to particular precautions with regard
to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere
with this unit. More details can be requested from the stated Customer Service address or found at the end of
the instructions for use.
581 x 337 x 241 mm
~ 3 kg
FSL-YDW-36HRR
2 x 36 Watts
10.000 lux (15 - 20 cm)
Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
230 V ~, 50 Hz
+5°C to +45°C, 30 – 90 % relative humidity
+5°C to +50°C, 30 – 90 % relative humidity
Protection class II
~ 98%
64 lm/W
6.500 Kelvin
14
solution
Switch on the on/off button.
Connect the mains plug correctly.
The mains cable is defective. Contact
customer services or your retailer.
If you need to have the unit repaired,
contact customer service or an author-
ised dealer.