Kemper KHS Mini-Systemsteuerung MASTER 2.1 Montage- Und Bedienungsanleitung Seite 145

6.3
Device settings - Adding devices
Configuration of measurement
Select control type
Choose the available control types that can be
used by the selected KHS Mini Control System
from a drop-down list. The KHS Mini Control
System -SLAVE- in this example should act as a
measurement SLAVE.
Select sensor
The possible sensors are selected from a drop-
down list. A flow sensor must be assigned to the
KHS Mini Control System -SLAVE-.
© www.kemper-group.com – 01.2023 / K410068602008-00 – 145/265