Valve Manual Mode - Kemper KHS Mini-Systemsteuerung MASTER 2.1 Montage- Und Bedienungsanleitung

EN
3.1.2.6
Note!
The two mentioned flushing programs can be switched using an external manual switch.
The electrical connection is shown in Chapter 2.2.
Progr. Switchover

Valve manual mode

3.1.2.7
With the KHS Mini Control System MASTER 2.1, it
is possible to run a function test of the valves using
the „Valve manual mode" submenu. Furthermore,
the valves can be individually addressed during
Note Maintenance!
A function test is recommended after configuring the „Device settings" submenu to rule out
possible errors immediately.
120/265 – K410068602008-00 / 01.2023 – © www.kemper-group.com
Change program
Progr. Deactivate switchover
OK

Block system/select program

Select external input action
OK
OK
OK
maintenance. The functions are shown in the
following illustration. Manual operation is not
possible for the CoolFlow cold water regulating
valve.
OK
OK
OK