Aux Mode - Niceboy RAZE FUSION Bedienungsanleitung

*If the speaker is left inactive, it will turn off automatically after 10 minutes to save power.
CONNECTING TO A DEVICE
1. Press and hold the on/off button (3) for 3 seconds to turn the speaker on. The
speaker is now in pairing mode for wireless connectivity. Pairing mode is indicated
by the flashing of the blue operating LED (4).
2. Activate Bluetooth on your device. Select "Niceboy RAZE Fusion" in the list of
available devices.
3. The device will connect to the speaker. A successful pairing is indicated by a tone
and the blue operating LED (4) lighting up.
*When switched on again, the speaker automatically connects to the last paired device.
PLAYBACK
To start or pause a track, short-press button (5). Control the volume by short-pressing
button (1) or (6). Long-pressing button (1) or (6) skips to the next or previous track.

AUX MODE

1. Plug the 3.5 mm jack cable into the audio port (7); the speaker will automatically
switch to the corresponding mode.
2. Control what music the speaker plays using the device the speaker is connected
to. Control the speaker's volume by short-pressing button (1) or (6).
USB FLASH DRIVE AND MICRO SD CARD
Insert a data storage device into the corresponding port (8), (9).
The speaker automatically switches to playback mode, indicated by a tone.
To start or pause a track, short-press button (5). Control the volume by short-pressing
button (1) or (6). Long-pressing button (1) or (6) skips to the next or previous track.
*The device supports data storage devices with a maximum capacity of 32 GB and MP3.
FM MODE
Connect the enclosed USB-C cable to the charging port (11) and it will act as an
antenna. Long press button (5) and FM mode will be announced with an audio signal;
short press button (5) to automatically search and save radio stations. You can stop the
automatic search function by short pressing the same button (5). While out of the search
function you can switch between radio stations by long pressing buttons (1) and (6).
13