Scheppach MR760-E Original Bedienungsanleitung Seite 37

• Remove the connector from the socket and/or re-
move the removable rechargeable battery before
setting the device, changing accessories or putting
the device away. Such preventive safety measures
reduce the risk of starting the power tool acciden-
tally.
• Store idle power tools out of the reach of children
and Do not let people use the device who are not
familiar with it or who have not read these instruc-
tions. Power tools are dangerous in the hands of
untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. Have damaged parts re-
paired before using the device. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dif-
ferent from those intended could result in a hazard-
ous situation.
• Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grip-
ping surfaces do not allow for safe operation and
control of the power tool
Battery safety
• Only use battery charging devices recommended
by the manufacturer to charge the battery. A battery
charging unit suitable for one type of rechargeable
battery may cause a fire, electric shock, overheat-
ing or leaking of corrosive liquids from the battery
when used with another rechargeable battery.
• Only use the batteries intended for your tool. The
use of other rechargeable batteries can result in in-
juries and cause a fire.
• When the rechargeable battery is not in use, it must
be kept away from other metallic objects such as
staples, coins, keys, nails, screws or other small
metallic objects which could cause a short circuit of
the contacts. A short circuit between the battery con-
tacts can result in combustion processes or fires.
• A battery in poor condition can cause liquids to leak
out. Avoid contact with the liquid. In case of inad-
vertent contact, rinse with water. If liquid comes into
contact with the eyes, also consult a doctor. Liquids
which leak from the battery can cause irritation or
burns.
• Do not use any damaged or modified batteries or
tools. Damaged or modified batteries can exhibit
unpredictable behaviour and result in fire, explosion
or danger of injury.
• Do not expose the rechargeable battery or tool to
fire or excessive temperatures. Fire or temperatures
above 130°C may cause an explosion.
• Observe all instructions for the charging process
and do not charge the rechargeable battery or the
tool outside of this temperature range. Improper
charging or charging outside the specified temper-
ature range can damage the battery and increase
the danger of fire.
• Do not change the rechargeable battery at locations
where vapours or flammable substances are present
or which are very humid. Use a socket protected with
a residual current circuit breaker (RCD - Residual
Current Device) in order to reduce the risk of electric
shock if a humid environment cannot be avoided.
• Keep the battery charging cable out of the reach of
children.
Electrical safety
• The battery charging device connector must be
compatible with the socket. Never modify the con-
nector. Do not use any adapter for the earthed ca-
ble of the battery charging device. The unmodified
connector, which is suitable for the socket, reduces
the danger of an electric shock.
• The power tool connector must be compatible with
the power socket. Never modify the connector. Do
not use adapters with power tools that are earthed.
The unmodified connector, which is suitable for the
socket, reduces the danger of an electric shock.
• Avoid physical contact with grounded or earthed
surfaces, such as pipes, radiators, ovens or refriger-
ators. The danger of electric shock increases if the
body comes into contact with the ground or floor.
• Do not expose the power tools to rain or mois-
ture. Water that enters the power tool increases
the danger of electric shocks.
• Do not pull on the cable to unplug the battery
charging device connector. Keep the battery
charging device cable away from heat, oil, sol-
vents, sharp objects or edges and moving parts.
Damaged or entangled cables increase the danger
of electric shocks.
• Do not insert the cable incorrectly. Do not use the
cable to carry the tool, to pull it or to unplug the
connector from the socket. Keep the cable away
from heat, oil, sharp edges or moving parts. A
damaged or entangled cable increases the dan-
ger of an electric shock.
• If the power tool is to be used outdoors, use an
extension cable that is suitable for outdoor use.
Using an extension cable suitable for outdoor use
reduces the danger of electric shock.
• If using a power tool in a humid environment is
unavoidable, use a power socket protected by a
differential switch (RCD-Residual Current Device,
residual current circuit breaker). Using an RCD re-
duces the danger of an electric shock.
www.scheppach.com
GB | 37