Assembling The Gas Grill - Burnhard EARL S Bedienungsanleitung

ASSEMBLING THE GAS GRILL

ATTENTION: 2 people are required to assemble the grill.
Danger of injury
WARNING: Make sure your gas grill is properly installed, assembled and cared for. Failure to follow
these instructions may result in serious bodily injury and/or property damage. If you have any questions
concerning assembly or operation, consult our customer service.
The gas grill has several sharp edges. Wear protective gloves during assembly to prevent cuts.
Before starting with the assembly, remove all packaging material and protective film from the
component parts. We recommend leaving the Styrofoam sides of the base unit in place until it is ready
to be flipped over. This will prevent damage to the joints.
Check if all listed components are complete and without defects. If any part is missing or damaged,
contact us immediately. After assembly, check all components and screw connections. Make sure that all
cables are properly attached and that the burners are firmly attached to the nozzles.
First things first:
P
1
2
ut your favourite drink on ice!
IMPORTANT: Screw the gas bottle
holder in by hand and then two people
are needed to turn the stand over. Then
tighten the screws on the bottle holder
with a screwdriver.
42
4 x A