Atag ENERGION Bedienungsanleitung Seite 66

User Menu
HYBRID
This menu is available only if a hybrid product is installed. For
further information, see the product manual.
Hybrid Energy Manager
Quiet mode
Energy Manager logic
Hybrid Mode
Energy tariff settings
– "Quiet mode": refer to the paragraph "Heat Pump".
– "Energy Manager logic": the parameter allows to select
the operation of the hybrid system based on the "Max Sav-
ing" or "Max Ecology" values.
– "Hybrid Mode": the parameter allows to choose the heat
generators to be enabled in the production of heat.
– "Auto": both the heat pump and the boiler are used
to produce heat according to the setting of the
previous parameter.
– "Only boiler": only the boiler is used for the produc-
tion of heat.
– "Only HP": only the heat pump is used for the pro-
duction of heat.
– "Energy tariff settings": this menu allows you to set the
price for gas and electricity, as well as a reduced electricity
rate. The prices are expressed in cents.
66 / EN
HP WATER HEATER
This menu is available only if a DHW heat pump is installed.
For further information, see the product manual.
– "Operation mode": sets the DHW production mode.
– "Quiet mode activation HPWH" refer to the paragraph
>
Max Ecology
Auto
>
Fig. 67
"Operation mode":
– "GREEN": the heating elements are excluded from the
– "Comfort": domestic hot water is produced using both
– "Fast": domestic hot water is produced by using both the
– "I-memory": an algorithm optimises domestic hot water
– "HC - HP": the production of domestic hot water follows
"Heat Pump". For DHW heat pumps you can only activate
the function. You cannot set a start and end time.
Heat pump water heater
Operation mode
Quiet mode activation HPWH
production of domestic hot water and are activated only
in case of a heat pump malfunction.
the heat pump and the heating elements.
heat pump and the heating elements at the same time.
The heating elements are switched on together with the
heat pump to minimise the DHW storage tank charge time.
production according to the user's habits.
the settings of the EDF signal. To configure the EDF signal
of the heat pump, see the product manual.
Comfort
OFF
Fig. 68