Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
Base home page
The "Base" home page can be selected if the device is config-
ured as a system interface (Zone 0).
The central area shows information about the heating, cool-
ing or domestic hot water modes.
For the meaning of the icons, refer to the paragraph "Com-
plete home page".
10°
COMFORT
42°C
Customizable home page
Internal temperature
Required temperature
16°
20°
0
2
4
6
8
The home page "Customizable" allows the user to view infor-
mation that can be selected in the following options:
Internal temperature
Internal temperature
Required temperature
Outside air temperature
Operation mode
Fr 4-JUN 12:30
3,1 bar
50%
55°C
Fig. 4
Fr 4-JUN 12:30
20°
21°
16°
20°
16°
10
12
14
16
18
20
22
24
Fig. 5
Fr 4-JUN 12:30
20°
Fig. 6
21°
16°
55°C
If the device is associated with a zone, the room temperature
of the relevant zone is shown. If the device is configured as a
system interface (Zone 0), the room temperature of the zone
defined by the 0.4.0 parameter is shown.
Required temperature
Internal temperature
Required temperature
Outside air temperature
Operation mode
If the device is associated with a zone, the room set-point
temperature of the relevant zone is displayed. If the device
is configured as a system interface (Zone 0), the room set-
point temperature of the zone defined by the 0.4.0 parameter
is shown.
Internal temperature
Outside air temperature
Required temperature
Outside air temperature
Operation mode
The information is available if an outdoor temperature sensor
is connected or if the "weather from the Internet" function is
activated once the Wi-Fi module has been activated.
Heating time schedule profile
16°
20°
0
2
4
6
8
10
If the device is associated with a zone, the heating time
schedule profile of the relevant zone is displayed. If the device
is configured as a system interface (Zone 0), the heating time
schedule profile of the zone defined by the 0.4.0 parameter
is shown.
Cooling time schedule profile
19°
26°
0
2
4
6
8
10
Available only for products configured for the cooling mode.
If the device is associated with a zone, the cooling time
schedule profile of the relevant zone is displayed. If the device
is configured as a system interface (Zone 0), the cooling time
schedule profile of the zone defined by the 0.4.0 parameter
is shown.
Fr 4-JUN 12:30
20°
21°
Fig. 7
16°
55°C
Fr 4-JUN 12:30
20°
21°
16°
Fig. 8
55°C
16°
20°
16°
12
14
16
18
20
22
24
Fig. 9
19°
26°
19°
12
14
16
18
20
22
24
Fig. 10
47 / EN
Werbung
Inhaltsverzeichnis
