Atag ENERGION Bedienungsanleitung Seite 40

Introduction
Dear Madam,
Dear Sir,
thank you for choosing the ATAG ENER-
GION system.
This manual was drawn up with the aim
of informing you on how to use the sys-
tem, in order to enable you to optimally
use all the functions.
Store this booklet, as it contains all the
necessary information regarding the
product following its initial installation.
To find your nearest Technical Assis-
tance Service, please see our Internet
website www.atagverwarming.com.
Please also refer to the Warranty Certifi-
cate that you will find inside the pack-
aging, or which was handed to you by
the installer.
Symbols used through-
out this manual and
their meaning
i
WARNING Indicates important
information and particularly del-
icate operations.
WARNING: DANGER Indicates
a
actions that, if not performed
correctly, can lead to general in-
juries or malfunctions or material
damages to the appliance; they
therefore require special atten-
tion and adequate training.
40 / EN
Warranty
The ATAG product is covered by a con-
ventional warranty, which takes effect
from the date of purchase of the appli-
ance. For the warranty conditions, refer
to the warranty certificate accompany-
ing the product.
Compliance
The CE marking applied to the appli-
ance certifies that it conforms with the
essential requirements of the following
European Directives:
– 2014/30/EU (Electromagnetic Com-
patibility Directive)
– 2014/35/EU (Low Voltage Directive)
– RoHS 3 2015/863/EU on restrictions
regarding the use of certain hazard-
ous substances in electrical and elec-
tronic appliances (EN 50581)
– Regulation (EU) no. 813/2013 rela-
tive to ecodesign (no. 2014/C 207/02
- transitional methods of measure-
ment and calculation)
– 2014/68/EU (PED)
Disposal
PRODUCT CONFORMING TO EU DI-
RECTIVE 2012/19/EU and to Italian
Legislative Decree 49/2014 pursu-
ant to Art. 26 of Legislative Decree
no. 49 of 14 March 2014, "Imple-
mentation of Directive 2012/19/UE
on waste of electrical and electronic
equipment (WEEE)".
The barred wheeled bin symbol appear-
ing on the appliance or on its packag-
ing indicates that the product must be
collected separately from other waste at
the end of its useful life.
The user must therefore deliver the
decommissioned product to an appro-
priate local facility for separate collec-
tion of electrotechnical and electronic
waste. Alternatively, the appliance to be
scrapped can be delivered to the dealer
when purchasing a new equivalent ap-
pliance.
Proper separated collection of the
decommissioned appliance for its
subsequent recycling, treatment and
eco-compatible disposal helps to pre-
vent negative effects on the environ-
ment and human health, besides en-
couraging reuse and/or recycling of its
constituent materials.