Screen Settings; Standby Settings - Atag ENERGION Bedienungsanleitung

User Menu

Screen settings

LANGUAGE
Screen settings
Language
Time & Date
Home screen
Screen brightness

Standby settings

– Turn the selector to highlight the "Language" item
– Press the selector to enter the edit mode.
– Turn the selector to choose the desired language.
– Press the selector to confirm.
TIME & DATE
Time & Date
Date
Time
Legal hour
– Turn the selector to change the value of the selected
field.
– Press the selector to skip to the next item.
– To change a previously set value, press the "Back" button
.
62 / EN
English
>
>
50%
>
Fig. 56
30 / 05 / 2021
15 : 20
Auto
Save
Fig. 57
HOME SCREEN
From this menu you can set the type of home page.
– Press the selector to enter the edit mode.
– Turn the selector to choose one of the available set-
tings: "Complete", "Base", "Customizable" and "Hp Water
Heater".
SCREEN BRIGHTNESS
From this menu you can change the brightness of the display.
– Press the selector to enter the edit mode.
– Turn the selector to adjust the brightness of the dis-
play when it is in active mode (from 10% to 100%).
– Press the selector to confirm.
STANDBY SETTINGS
Standby settings
Brightness in standby
Standby timing
Screen saver selection
– "Brightness in standby": allows to set the brightness
of the display when the device is in stand-by mode (from
10% to 30%).
– "Standby timing": allows to set the time interval (from
1 to 10 minutes) from the last operation made on the de-
vice, after which the screen enters stand-by mode and
its brightness is reduced to the value set for the stand-by
mode.
– "Screen saver selection": allows to select the type of
screen to be displayed in stand-by mode.
70%
1 min
Room T
Fig. 58