Choosing An Installation Location - Dometic 10-Serie Montageanleitung

Installing the refrigerator
4.1

Choosing an installation location

A
NOTICE! Damage hazard
• The refrigerator may not be installed in the rear of mobile homes with
the door pointing in the direction of travel.
• Leave the device in a vertical position for at least 3 hours before start-
ing up for the first time.
When installing the refrigerator, note the following:
• Ensure that the floor is solid and level.
Park the vehicle horizontally for this purpose.
• The refrigerator must be installed so that:
– easily accessible for service work
– easy to uninstall and install
– can be easily removed from the vehicle
• In campervans an undercounter unit can be installed with the door pointing in the
direction of travel, as long as it is installed next to the sliding door and behind the
co-driver's seat.
• The refrigerator must be installed in a recess so that it stands secure when the
vehicle is in motion. Note the dimensions in fig. 1, page 3
for this purpose.
Note the following recess dimension (fig. 2, page 4):
Refrigerator height (A)
Refrigerator width (B)
Refrigerator depth (C)
(excludes control knob
5 mm)
Recess height (H)
Recess width (W)
Recess depth (D)
• The refrigerator must be installed with a minimum distance of 5 mm from the floor
to ensure that the door can be opened properly (fig. 3, page 4).
– Make sure that no carpets interfere with the free movement of the door.
– Avoid placing the refrigerator directly on the floor.
12
RCD10.ES, RCD10.5ET
1283 mm
523 mm
550 mm
1286 mm
528 mm
568 mm
RCD10.5
fig. 3, page 4
and
RCD10.XES, RCD10.5XET
1283 mm
523 mm
605 mm
1286 mm
528 mm
623 mm
EN