Option 72 / 76: Digital Interface (12- Or 16-Bit) - heinzinger PNC-Serie Betriebsanleitung

7 . 2 . 1 7 . O p t i o n 7 2 / 7 6 : D i g i t a l i n t e r f a c e ( 1 2 - o r 1 6 - b i t )
N O T E
A separate manual is available for digital interface I and II.
There are also two interface versions available:
Digital interface I (option 72 I or option 76 I):
RS232 / RS485 interfaces.
Digital interface II (option 72 II or option 76 II):
RS232 / IEEE488 interfaces.
The digital interfaces are electrically isolated and can be retrofitted on existing
units. For more information, please contact the Heinzinger service department.
Indicators on front of unit:
Steuerung/Control
Digital
Fern
Remote
made via a digital interface
T E C H N I C A L S P E C I F I C A T I O N S
Resolution:
Option 72: 12 Bit  2.510
Option 76: 16 Bit  1.510
Insulation voltage: 2 kV
Control command set according to SCPI standard.
The digital interface enables the operator to
control the PNC power supply unit via computer
and monitor the output current and voltage.
Two options are available: 12-bit (option 72)
and 16-bit (option 76) resolution.
'Local' LED glows:
Output voltage/current adjusted with the internal
potentiometer or via the analog interface.
Eigen
Local
'Remote' LED glows: Setting adjustments
-4
of reference value
-5
of reference value
DC
User Manual PNC – V 1.16
63