Intended Use; Residual Risks And Safety Measures - heinzinger PNC-Serie Betriebsanleitung

2 . 4 . I n t e n d e d u s e
Safety, reliability and performance can only be guaranteed if
the unit is used for its intended purpose,
upgrades, modifications and repairs are performed only by persons authorised
by the manufacturer,
the electrical installations are in compliance with the applicable safety
regulations,
and connecting and operating conditions prescribed in this user manual are
observed.
2 . 5 . R e s i d u a l r i s k s a n d s a f e t y m e a s u r e s
The high-voltage power supply of the PNC/PNChp series is delivered in sound
working condition. It creates radio interference (threshold values acc. to EN
61000-6-4, class B). The operator is personally responsible for compliance with
the specific safety regulations relating to a connected application.
There is a risk of electrical shock when starting, operating or shutting down the
high-voltage power supply unit if
the output voltage is switched on, although no load is connected to the HV
output as directed,
the unit is operated in spite of a known defect,
the connected application represents a violation of the applicable electro-
technical safety regulations,
the unit was switched off and there is dangerous voltage at the output due to
external and/or residual charges,
instructions in this user manual were not fully observed.
The specific safety measures for the unit are described in the following chapters.
User Manual PNC – V 1.16
43