Charging Time - Parkside PHKSA 12 B3 Originalbetriebsanleitung

Sound pressure level
) ...................86,4 dB(A), K
(L
pA
Sound power level
) ................. 97,4 dB(A); K
(L
WA
Vibration (a )
h, W
Sawing in wood ............... = 3,27 m/s
Temperature........................... max 50 °C
Charging process .................. 4 - 40 °C
Operation ..........................-20 - 50 °C
Storage ................................ 0 - 45 °C
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The specified vibration emission value can
also be used for a provisional assessment
of the load.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.

Charging time

(min)
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2
PDSLG 12 A1
PDSLG 12 A2
= 3 dB
pA
= 3 dB
WA
2
K= 1,5 m/s
2
Charging time
The device is part of the X 12 V TEAM se-
ries and can be operated with batteries of
the X 12 V TEAM series.
Batteries of the X 12 V TEAM series may
only be charged using chargers of the
X 12 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B1,
PAPK 12 B2.
We recommend charging these batteries
with the following chargers: PLGK 12 A1,
PLGK 12 A2, PLGK 12 B2.
PAPK 12 A1
PAPK 12 A2
PAPK 12 A3
60
60
30
60
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when
the electric tool is switched off and
times when it is switched on but
running without any load).
PAPK 12 B1
PAPK 12 B2
PAPK 12 B3
60 120
60 120
45 60
45 60
GB
PAPK 12 D1
150
150
80
80
23