Recommended Setting Of The Cooling Or Freezing Level; Power Failure - yuna FROSTER 100 Bedienungsanleitung

NOTICE! Please note: if you deactivate the F
appliance switches to fridge mode first. You must press the « S
» -
TEMPERATURE
again.

4.6.4 Recommended setting of the cooling or freezing level

❖ The following cooling or freezing level setting is recommended for the appliance.
M
ODE
Fridge mode
Freezer mode

4.7 Power failure

❖ In the case of a power failure, the current settings will be secured and maintained.
❖ If the appliance is supplied with power again, it continues to work with the
settings adjusted before.
❖ Max storage time in case of malfunctions: s. chapter T
In the event of an unpredictable power failure:
➢ reduce the opening frequency of the door(s).
➢ do not put any new food in the appliance to avoid a rapid rise of the
temperature inside the appliance.
I
N FREEZER MODE ONLY
can activate the F
freezer as a precautionary measure to set the appliance to the lowest temperature
(= strongest cooling) so that it is maximally cooled at the time of the power
failure.
NOTICE! In an event of a power failure, do not open the door so your
food can remain in the appliance for -x- hours (-x-: see chapter
).
DATA
repeatedly until the freezer mode is activated
BUTTON
C /
OOLING
F
REEZING LEVEL
Cooling level 2
Freezing level 3
: in the event of a predictable power failure, you
- F
AST REEZING
AST
I
NDICATOR BAR
M and decrease the temperature of the
ODE
- F M
REEZING ODE
.
ECHNICAL DATA
TECHNICAL
, the
ET
76