Fridge Mode: Setting Of The Cooling Temperature (Cooling Level) - yuna FROSTER 100 Bedienungsanleitung

4.6.1 Fridge mode: setting of the cooling temperature (cooling level)

❖ Two settings can be selected in fridge mode (cooling levels 1 - 2).
T
WO SETTINGS
Cooling level 1
Freezing level 2
You can check the cooling temperature inside the appliance using a suitable
thermometer (not included in the scope of delivery).
H
OW TO SET THE COOLING TEMPERATURE
1. The
FRIDGE MODE
S
ETTING OF THE FRIDGE OR FREEZER MODE
2. The operational status indicator of the fridge mode
is on (blue); cooling level 1 is set at the same time.
3. To set cooling level 2, press the « S
TEMPERATURE
status indicator (blue) of the set cooling level goes on
(s. fig. on the right).
4. After 5 seconds without using any operating
buttons, the set cooling level (e.g., cooling level 2)
will be activated.
5. The set cooling level is in operation.
6. After 30 minutes without using any operating buttons, the lighting intensity of
the currently lit indicators is reduced.
Please observe chapter 4.6.4 « R
FREEZING LEVEL
(
COOLING LEVELS
must be set (s. chapter 4.5
» - once. The operational
BUTTON
ECOMMENDED SETTING OF THE COOLING OR
».
)
ARE AVAILABLE
lower / slighter cooling
higher / stronger cooling
(
COOLING LEVEL
).
Cooling level 1
ET
Cooling level 2
E.g., cooling level 2
)
73