Sound Mode (Optional); Avl; Spdif Out; Srs Trusurr Xt (Optional) - Tech Line TL-26LC855 Bedienungsanleitung

Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive
window.

Sound Mode (optional)

Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL . Press " "
or " " button to set the AVL as On or Off .

Spdif Out

Press " " or " " button to select Spdif Out .
Press " " or " " button to set the Spdif Out .
as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.

SRS TruSurr XT (optional)

By pressing " " or " " select SRS TruSurr XT .
Press " " or " " button to set SRS TruSurr XT
as on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
Dolby Virtual Speaker (optional)
This feature is used to create the impression that
sound is coming from around the room instead
of the set speakers. Pressing the " " or " "
buttons will turn the feature on or off.
Note: If you set Dolby Virtual Speaker as On, some
features in the Sound menu can be unavailable to
be set.
Dolby VS (optional)
This feature is used to create the impression
that sound is coming from around the room
instead of the set speakers. Press " " / " "
buttons to set Dolby Virtual Speaker as Off,
Wide or Reference.
Note: If you set Dolby VS as On, some features in the
Sound menu can be unavailable to be set.
Dolby VS Mode
If you set Dolby VS as Reference or Wide,
Dolby VS Mode options will be available to be
set as Movie or Music. Use
to select.

Effect

If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press " " or " " button to select Effect. Press
" " or " " button to set as On or Off .

Store

Press " " or " " button to select Store.
Press " " or OK button to store the settings.
" Stored... " will be displayed on the screen. .

Feature Menu

Pip-Pap

In the Feature menu, highlight PIP item by
pressing " " or " " buttons. Press " " button
to enter PIP submenu:
English - 59 -
" " or " " button