Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Procedure - Morso VULCANO WOK BURNER Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
OPERATION
BURNER OPERATION & IGNITION SYSTEM CHECK
Problem
Burner will not ignite
Food is not cooking
or is taking too long
Should you experience difficulties when lighting up your Wok Burner , the following may help:
1. Adjustment of the 'Piezo' spark igniter: It is important to ensure that the 'Piezo' (spark) igniter is correctly positioned
opposite the holes of the burner. The igniter may possibly have moved during transport or use. When the Wok Burner
is cold, the 'Piezo' igniter can be carefully adjusted, using your fingers or a small pair of pincers. Make sure that the
needle of the 'Piezo' igniter gets closer to the burner (a distance of about 2-4 mm between the two needles and the
burner) and that the needle is pointed at a hole in the burner.
2. Cleaning of the burner: Food scraps, fat, or other impurities may occasionally be deposited on the burner and thus
block some of its holes. Make sure that the Wok Burner is cold, use a needle or a paper clip to cleanse the burner
holes. Be sure not to push the 'Piezo' burner during this process.

OPERATING PROCEDURE

Cooking: The control knob can be turned from 'MAX' to 'MIN' depending on the heat required.
IMPORTANT
Morsø Vulcano Wok Burner is equipped with a burner with a power of 8 KW, so whether it is boiling water or
cooking, its powerful firepower can quickly fulfill your needs.
MAINTENANCE:
Through regular use, and exposure to the outdoor elements, Outdoor products will always
show some signs of 'wear and tear'. This is completely normal. We always advise to use a Morsø cover to pro-
tect your wok burner when it is not in use. Make sure that your wok burner is completely cooled down and dry,
before covering your wok burner.
DATA PÅ MORSØ FORNO GAS
Possible Reason
Control knob is closed
The ignition needle is faulty
Burner has gone out
There is too much food in the
wok pan.
Solution
Turn knob to high when lighting
Adjust the ignition needle to have 2-4 mm gap.
between the two needles.
Check that the gas bottle is not empty and
reignite the burner
Cook smaller portions
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis