Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GENERAL INFORMATION
CONNECTING & DISCONNECTING
TO GAS SOURCE
Familiarise yourself with the general information and
safety guidelines located at the front of this manual.
Check
1. Gas cylinder is filled. A sloshing sound will be heard
when shaken.
2. The burner control is in the 'OFF' position
Connecting
1. Ensure valve is in OFF position.
2. Check for any damage to the cylinder connection.
3. Attach the regulator to the cylinder valve.
4. Use a soapy water solution to check the joint. If bub-
bles appear the connection will need to be retight-
ened.
Length
330 mm
IMPORTANT
• IMPORTANT: Before connecting and disconnecting
Wok Burner to gas source, make sure burner con-
trols are in 'OFF' position.
• CAUTION: When the Wok Burner is not in use, the
gas cylinder must be disconnected.
• Check that the seals between the appliance and the
gas cylinder are in place and in good condition be-
fore connecting the gas cylinder.
• Do not use this appliance if it has damaged or worn
seals.
• Check performance of burner prior to use.
• Do not smoke when attempting to ignite Wok Burner.
• Never use volcanic rock, heat beads or other material.
• Always use protective gloves when handling hot
components.
22
Width
Height
330 mm
196 mm
GARANTI
LIGHTING INSTRUCTIONS
1. Push in and turn the Counter clockwise to MAX.
2. If burner does not light, return control knob to OFF
and retry 5 times.
3. If burner does not light, leave the knob at OFF and
wait 5 minutes before retrying.
If re–ignition is necessary while the gas Wok Burner is
still hot, you must wait for a minimum of 5 minutes be-
fore commencing to re–ignite (this allows accumulated
gas fumes to clear).
IMPORTANT
Do not smoke at any time when attempting
to ignite the Wok Burner.
Do not leave the Wok Burner unattended
when alight.
Werbung
Inhaltsverzeichnis
