Connecting The Gas Cylinder - Morso VULCANO WOK BURNER Bedienungsanleitung

ASSEMBLY INSTRUCTIONS
Remove any transit protection material.
STEP 1
Install the lid above the housing
(the face with fire baffle is on the front).
STEP 2
Connect the regulator to the hose, Turn the
nut on the hose counterclockwise until the
regulator is firmly connected to the hose. Use a
24 mm (or adjustable) spanner to ensure a tight
connection.
STEP 3
Connect the hose to the wok burner Turn the
nut on the hose counterclockwise until the
hose is firmly connected to the thread of the
wok burner. Use a 24 mm (or adjustable) span-
ner to ensure a tight connection.

CONNECTING THE GAS CYLINDER

Use 1. Propane, 2. Butane, or 3. Propane/butane
mix, which is supplied in gas cylinders.
The gas cylinders must be positioned adjecent
or below Wok Burner.
The connection between the gas cylinder
and the Wok Burner is made with a regulator.
It is important that you use the correct regula-
tor which follows the product.
MONTAGEVEJLEDNING
STEP3
Connect the hose to the wok burner
Turn the nut on the hose counterclockwise until the hose is
firmly connected to the G6 thread of the wok burner.
STEP2
Connect the regu
Turn the nut on t
the regulator is fir
21